Battery Installation - VTech LS6204 User Manual

Getting started

Battery installation

Install the battery as shown below.
1. If the battery compartment cover is on the handset, press on the triangle
and slide the cover to remove.
2. Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires
3.
inside the battery compartment.
4. Align the cover flat against the battery compartment, then slide it towards
the center of the handset until it clicks into place.
5. Charge the handset by placing it in the telephone base or charger. The
CHARGE light is on when the handset charges.
1
4
• If the handset will not be used for a long time, disconnect and remove the
battery to prevent possible leakage.
• To purchase a replacement battery, visit our website at
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial 1 (800) 267-7377.
2
2
3
5
CHARGE light