Download Print this page

Zanussi FL1016/A Instructions For The Use And Care page 23

Hide thumbs Also See for FL1016/A:

Advertisement

Cleaning the drain filter
(see diagram)
Unscrew and pull out the filter
(figure 7-8)
Underneath the filter there is a small
extractable gutter which makes it easier
to collect any residual water that might
flow out when the filter is removed.
Remove any object or fluff and replace
the filter.
This filter should be checked after each
wash.
Cleaning inlet filters
These are situated at the back of the
machine and should be inspected from
time to time. Turn off the water taps.
Unscrew the hoses and remove the mesh
filter lodged just inside the hose.
Run them under a fast running tap to
remove any sediment. Replace the wire
filters and the hoses firmly.
Cleaning the washing powder dispenser
Wipe it out after every wash.
From time to time it will need more
thorough cleaning to clear out all the
deposit. Remove the drawer completely
with a sharp pull outwards. When you
replace it, if you find that it doesn't slide
right in again give it a sharp tap with the
palm of your hand.
23

Advertisement

loading