Dell PowerEdge 2850 User Manual page 6

NOTE: When creating macros in HyperTerminal, press <Insert> before <Esc> to signify that you are sending an escape sequence rather than escaping
out of the dialog box. If you do not have this function, you must upgrade HyperTerminal.
NOTE: Escape-sequence key combinations listed in
<Shift><a>.
Table B-1. Supported Escape Sequences
Key(s) Supported Sequence
<Up arrow> <Esc><[><A>
<Down arrow> <Esc><[><B>
<Right arrow> <Esc><[><C>
<Left arrow> <Esc><[><D>
<F1> <Esc><O><P>
<F2> <Esc><O><Q>
<F3> <Esc><O><R>
<F4> <Esc><O><S>
<F5> <Esc><O><T>
<F6> <Esc><O><U>
<Esc><[><1><7><~> VT 100/220
<F7> <Esc><O><V>
<Esc><[><1><8><~> VT 100/220
<F8> <Esc><O><W>
<Esc><[><1><9><~> VT 100/220
<F9> <Esc><O><X>
<Esc><[><2><0><~> VT 100/220
<F10> <Esc><O><Y>
<Esc><[><2><1><~> VT 100/220
<F11> <Esc><O><Z>
<Esc><[><2><3><~> VT 100/220
<F12> <Esc><O><A>
<Esc><[><2><4><~> VT 100/220
<Home> <Esc><[><1><~>
<Esc><h>
<End> <Esc><[><4><~>
<Esc><k>
<Delete> <Esc><[><3><~>
<Esc><–>
<Delete> <Esc><[><3><~>
<Esc><–>
<Page Up> <Esc><[><5><~>
<Esc><Shift><?>
<Page Down> <Esc><[><6><~>
<Esc></>
<Shift><Tab> <Esc><[><Z>
<Esc><[><0><Z>
<Esc><[><Shift><z>
After creating macros for the keys listed in Table B-1, press <F1> on the client system's keyboard during terminal emulation to send the escape sequence
<Esc><O><P> to the host system. The host system then interprets the sequence as <F1>.
Additional escape sequences may be required by certain utilities or functions on the host system. Create macros for the additional sequences listed in
2.
NOTE: Escape-sequence key combinations listed in
<Shift><a>.
Table B-2. Additional Escape Sequences
Key(s) Supported Sequence
<Ctrl><Alt><Del> <Esc><R><Esc><r><Esc><R>
(Reboot host system)
<Alt><x> <Esc><X><X>
Table B-1 are case-sensitive. For example, to generate the character <A> you must press
Terminal Emulation
VT 100/220, ANSI
VT 100/220, ANSI
VT 100/220, ANSI
VT 100/220, ANSI
VT 100/220, ANSI
VT 100/220, ANSI
VT 100/220, ANSI
VT 100/220, ANSI
VT 100, ANSI
VT 100, ANSI
VT 100, ANSI
VT 100, ANSI
VT 100, ANSI
VT 100, ANSI
VT 100, ANSI
VT 100, ANSI
VT 220
ANSI
VT 220
ANSI
VT 220
ANSI
VT 220
ANSI
VT 220
ANSI
VT 220
ANSI
VT 100
VT 220
ANSI
Table B-2 are case-sensitive. For example, to generate the character <A> you must press
Table B-