ASROCK PHANTOM GAMING Z790 RIPTIDE WiFi User Manual page 43

RGB LED Header
(4-pin RGB_LED1) (see p.7, No. 27)
This RGB header is used to connect RGB LED extension cable which allow users to
choose from various LED lighting effects.
*The RGB LED extension cable is purchased separately.
Caution: Never install the RGB LED cable in the wrong orientation; otherwise, the
cable may be damaged.
Connect your RGB LED strip to the RGB
LED Header (RGB_LED1) on the mother-
board.
1. Never install the RGB LED cable in the wrong orientation; otherwise, the cable
may be damaged.
2. Before installing or removing your RGB LED cable, please power off your system
and unplug the power cord from the power supply. Failure to do so may cause dam-
ages to motherboard components.
1. Please note that the RGB LED strips do not come with the package.
2. The RGB LED header supports standard 5050 RGB LED strip (12V/G/R/B), with a
maximum power rating of 3A (12V) and length within 2 meters.
RGB_LED1
1
+12V G R B
1
Z790 Riptide WiFi
39