1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. PHANTOM GAMING Z790 RIPTIDE WiFi
  6. User manual

ASROCK PHANTOM GAMING Z790 RIPTIDE WiFi User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
AsRock Z790 Riptide
WiFi
o cerca il tuo prodotto tra le
migliori offerte di Schede Madri

Advertisement

Table of Contents
loading

Related Manuals for ASROCK PHANTOM GAMING Z790 RIPTIDE WiFi

Summary of Contents for ASROCK PHANTOM GAMING Z790 RIPTIDE WiFi

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per AsRock Z790 Riptide WiFi o cerca il tuo prodotto tra le migliori offerte di Schede Madri...
  • Page 2 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...

  • Page 3: Table Of Contents

    Chapter 1 Introduction Package Contents Specifications Motherboard Layout I/O Panel Block Diagram 802.11be Wi-Fi 7 Module and ASRock WiFi 2.4/5/6 GHz Antenna Chapter 2 Installation Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules (DIMM) Connecting the Front Panel Header...
  • Page 4 2.14 M.2 SSD Card Installation Guide (M2_GEN5) 2.15 M.2 SSD Card Installation Guide (M2_1 and M2_2) 2.16 M.2 SSD Card Installation Guide (M2_3 and M2_4) 2.17 Change Screen Brightness for eDP in Windows®...

  • Page 5: Chapter 1 Introduction

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.

  • Page 6: Specifications

    • Supports DDR5 non-ECC, un-buffered memory up to 8000+(OC)* • Max. capacity of system memory: 192GB • Supports Intel® Extreme Memory Profile (XMP) 3.0 * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) Expansion CPU: Slot • 1 x PCIe 5.0 x16 Slot (PCIE1), supports x16 mode*...
  • Page 7 Z790 Riptide WiFi Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated. • Intel® X Graphics Architecture (Gen 12) • 1 x eDP 1.4, supports max. resolution up to Full HD 60Hz • 1 x HDMI 2.1 TMDS Compatible, supports HDCP 2.3 and max.
  • Page 8 • 1 x USB 3.2 Gen2x2 Type-C (Front) • 2 x USB 3.2 Gen2 Type-A (Rear) • 1 x USB 3.2 Gen1 Type-C (Rear) • 6 x USB 3.2 Gen1 Type-A (4 Rear, 2 Front) • 6 x USB 2.0 (2 Rear, 4 Front) * All USB ports support ESD Protection Rear Panel • 2 x Antenna Mounting Points...
  • Page 9 • 2 x 8 pin 12V Power Connectors (Hi-Density Power Connec- tor) • 1 x Front Panel Audio Connector • 1 x Thunderbolt AIC Connector (5-pin) (Supports ASRock Thunderbolt 4 AIC Card) • 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) • 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
  • Page 10 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools.

  • Page 11: Motherboard Layout

    Z790 Riptide WiFi 1.3 Motherboard Layout Top Side View CPU_FAN1 ATX12V1 ATX12V2 DRAM CPU_FAN2/WP BOOT USB 2.0 T: USB_1 B: USB_2 USB 3.2 Gen1 T: USB32_1 B: USB32_2 USB 3.2 Gen2 T: USB32_3 B: USB32_4 USB 3.2 Gen1 Top: T: USB32_5 RJ-45 B: USB32_6 PCIE1...
  • Page 12 Back Side View...
  • Page 13 Z790 Riptide WiFi No. Description ATX 12V Power Connector (ATX12V1) ATX 12V Power Connector (ATX12V2) CPU/Water Pump Fan Connector (CPU_FAN2/WP) CPU Fan Connector (CPU_FAN1) 2 x 288-pin DDR5 DIMM Slots (DDR5_A1, DDR5_B1) 2 x 288-pin DDR5 DIMM Slots (DDR5_A2, DDR5_B2) Addressable LED Header (ADDR_LED3) Addressable LED Header (ADDR_LED2) Chassis/Water Pump Fan Connector (CHA_FAN2/WP)

  • Page 14: I/O Panel

    1.4 I/O Panel No. Description No. Description Antenna Ports USB 3.2 Gen1 Type-C Port (USB32_TC1) 2.5G LAN RJ-45 Port* USB 3.2 Gen2 Ports (USB32_34) Line In (Light Blue)** USB 3.2 Gen1 Ports (USB32_12) Front Speaker (Lime)** USB 2.0 Ports (USB_12) Microphone (Pink)** DisplayPort 1.4 USB 3.2 Gen1 Ports (USB32_56)***...
  • Page 15 Z790 Riptide WiFi ** Function of the Audio Ports in 7.1-channel Configuration: Port Function Light Blue (Rear panel) Rear Speaker Out Lime (Rear panel) Front Speaker Out Pink (Rear panel) Central /Subwoofer Speaker Out Lime (Front panel) Side Speaker Out *** USB32_56 are Lightning Gaming Ports.

  • Page 16: Block Diagram

    1.5 Block Diagram...

  • Page 17: 802.11Be Wi-Fi 7 Module And Asrock Wifi 2.4/5/6 Ghz Antenna

    Z790 Riptide WiFi 1.6 802.11be Wi-Fi 7 Module and ASRock WiFi 2.4/5/6 GHz Antenna 802.11be Wi-Fi 7 + BT Module This motherboard comes with an exclusive 802.11 a/b/g/n/ac/ax/be Wi-Fi 7 + BT v5.4 module that offers support for 802.11 a/b/g/n/ac/ax/be Wi-Fi 7 connectivity standards and Bluetooth v5.4.

  • Page 18: Chapter 2 Installation

    Chapter 2 Installation This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.

  • Page 19: Installing The Cpu

    Z790 Riptide WiFi 2.1 Installing the CPU 1. Before you insert the 1700-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 20 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.

  • Page 21: Installing The Cpu Fan And Heatsink

    Z790 Riptide WiFi 2.2 Installing the CPU Fan and Heatsink...

  • Page 22: Installing Memory Modules (Dimm)

    2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR5 (Double Data Rate 5) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR5 DIMM pairs. 2.
  • Page 23 Z790 Riptide WiFi...

  • Page 24: Connecting The Front Panel Header

    2.4 Connecting the Front Panel Header Front Panel Wires System Panel Header Power SW (-) RESET SW (+) Power SW (+) RESET SW (-) Power LED (-) HDD LED (-) Power LED (+) HDD LED (+) PANEL1...

  • Page 25: Installing The Motherboard

    Z790 Riptide WiFi 2.5 Installing the Motherboard...

  • Page 26: Installing Sata Drives

    2.6 Installing SATA Drives Optical Drive SATA Drive SATA Data Cable...
  • Page 27 Z790 Riptide WiFi SATA Power Connector SATA Data Connector...

  • Page 28: Installing A Graphics Card

    2.7 Installing a Graphics Card CLICK!
  • Page 29 Z790 Riptide WiFi Expansion Slots (PCIe Slots) There are 3 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

  • Page 30: Connecting Peripheral Devices

    2.8 Connecting Peripheral Devices...

  • Page 31: Connecting The Power Connectors

    Z790 Riptide WiFi 2.9 Connecting the Power Connectors...

  • Page 32: Power On

    2.10 Power On...

  • Page 33: Jumpers Setup

    Z790 Riptide WiFi 2.11 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper (CLRMOS1) (see p.7, No.

  • Page 34: Onboard Headers And Connectors

    2.12 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header (9-pin PANEL1) (see p.7, No.
  • Page 35 Z790 Riptide WiFi Power LED and Speaker Header (7-pin SPK_PLED1) (see p.7, No. 20) Please connect the chassis power LED and the chassis speaker to this header. SPK_PLED1 SPEAKER DUMMY DUMMY PLED+ PLED+ PLED- Serial ATA3 Connectors Vertical: (SATA3_0) (see p.7, No. 22) (SATA3_1) (see p.7, No.
  • Page 36 USB 2.0 Headers (9-pin USB_3_4) (see p.7, No. 25) (9-pin USB_5_6) (see p.7, No. 24) There are two headers on this motherboard. Each USB 2.0 header can support two ports. USB_3_4 USB_PWR DUMMY USB_PWR USB_5_6 USB_PWR DUMMY USB_PWR USB 3.2 Gen1 Header (19-pin USB32_7_8) (see p.7, No.
  • Page 37 Z790 Riptide WiFi Front Panel Type C USB 3.2 Gen2x2 Header (20-pin USB32_TC2) (see p.7, No. 12) There is one Front Panel Type C USB 3.2 Gen2x2 Header on this motherboard. This header is used for connecting a USB 3.2 Gen2x2 module for additional USB 3.2 Gen2x2 ports.
  • Page 38 Chassis Fan Connector (4-pin CHA_FAN5) (see p.7, No. 23) Please connect fan cables to the fan connector and match the black wire to the ground pin. CHA_FAN5 GN D +12V CHA_FAN_SPEED FAN_SPEED_CONTROL Chassis/Water Pump Fan Connectors (4-pin CHA_FAN1/WP) (see p.7, No. 33) (4-pin CHA_FAN2/WP) (see p.7, No.
  • Page 39 Z790 Riptide WiFi CPU Fan Connector (4-pin CPU_FAN1) (see p.7, No. 4) This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. CPU_FAN1 +12V CPU_FAN_SPEED FAN_SPEED_CONTROL CPU/Water Pump Fan Connector (4-pin CPU_FAN2/WP) (see p.7, No.
  • Page 40 ATX Power Connector (24-pin ATXPWR1) (see p.7, No. 11) This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. ATXPWR1 ATX 12V Power Connectors (8-pin ATX12V1) (see p.7, No. 1) (8-pin ATX12V2) (see p.7, No.
  • Page 41 Z790 Riptide WiFi SPI TPM Header (13-pin SPI_TPM_J1) (see p.7, No. 18) This connector supports SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
  • Page 42 Thermistor Cable Header (4-pin T_SENSOR1) (see p.7, No. 30) The Thermistor Cable Header is used to connect thermistor cable to monitor the temperature of the critical components. Plug the thermistor cable that comes with the package to this header, and then attach the sensor end to the component to detect its temperature.
  • Page 43 Z790 Riptide WiFi RGB LED Header (4-pin RGB_LED1) (see p.7, No. 27) This RGB header is used to connect RGB LED extension cable which allow users to choose from various LED lighting effects. *The RGB LED extension cable is purchased separately. Caution: Never install the RGB LED cable in the wrong orientation;...
  • Page 44 Addressable LED Headers (3-pin ADDR_LED1) (see p.7, No. 26) (3-pin ADDR_LED2) (see p.7, No. 8) (3-pin ADDR_LED3) (see p.7, No. 7) These headers are used to connect Addressable LED extension cables which allow users to choose from various LED lighting effects. Caution: Never install the Addressable LED cable in the wrong orientation;...
  • Page 45 Z790 Riptide WiFi 1. Never install the Addressable LED cable in the wrong orientation; otherwise, the cable may be damaged. 2. Before installing or removing your Addressable LED cable, please power off your system and unplug the power cord from the power supply. Failure to do so may cause damages to motherboard components.
  • Page 46 eDP Signal Connector (40-pin EDP1) (see p.8, No. 34) This connector on the bottom side of the motherboard is for an LCD monitor that supports an internal embedded DisplayPort (eDP). *Please refer to page 54 for further instructions on how to adjust the brightness. SIGNAL LCD_BLT_VCC LCD_BLT_VCC...

  • Page 47: Post Status Checker

    Z790 Riptide WiFi 2.13 Post Status Checker Post Status Checker (PSC) diagnoses the computer when users power on the machine. It emits a red light to indicate whether the CPU, memory, VGA or storage is dysfunctional. The lights go off if the four mentioned above are function- ing normally.
  • Page 48 2.14 M.2 SSD Card Installation Guide (M2_GEN5) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Blazing M.2 Socket (M2_GEN5, Key M) supports type 2280 PCIe Gen5x4 (128 Gb/s) mode. * If M.2_GEN5 is occupied, PCIE1 will downgrade to x8 mode.
  • Page 49 Z790 Riptide WiFi Step 3 Align and gently insert the M.2 SSD card into the M.2 slot. Please be aware that the M.2 SSD card only fits in one orientation. Step 4 Ensure that the notch at the end of the M.2 SSD card aligns with the nut.
  • Page 50 Step 6 Move the M.2 heatsink in the direction shown (A) and press it down (B). Step 7 Complete. For the latest updates of M.2 SSD card support list, please visit our website for details: http://www.asrock.com...
  • Page 51 Z790 Riptide WiFi 2.15 M.2 SSD Card Installation Guide (M2_1 and M2_2) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Sockets (M2_1 and M2_2, Key M) support type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode.
  • Page 52 Step 3 Before installing a M.2 SSD card, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD card. Step 4 Peel off the yellow protective film on the nut A.
  • Page 53 Tighten the screw with a screwdriver to secure the M.2 heatsink into place. Please do not overtighten the screw as this might damage the M.2 heatsink. For the latest updates of M.2 SSD card support list, please visit our website for details: http://www.asrock.com...
  • Page 54 2.16 M.2 SSD Card Installation Guide (M2_3 and M2_4) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Sockets (M2_3 and M2_4, Key M) support type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode.
  • Page 55 Z790 Riptide WiFi Step 3 Before installing a M.2 SSD card, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD card. Step 4 Peel off the yellow protective film on the nut A.
  • Page 56 Tighten the screw with a screwdriver to secure the M.2 heatsink into place. Please do not overtighten the screw as this might damage the M.2 heatsink. For the latest updates of M.2 SSD card support list, please visit our website for details: http://www.asrock.com...
  • Page 57 Z790 Riptide WiFi 2.17 Change Screen Brightness for eDP in Windows® This section explains how to change screen brightness in Windows® when you use an eDP panel. The following is a setup example for Windows® 11. Setup procedures may vary from different operating systems.
  • Page 58 Step 3 You might also see another check box displayed: Help improve battery by optimizing the content shown and brightness. Select the check box to turn on the content adaptive brightness control if needed.
  • Page 59 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 60 INTEL END USER SOFTWARE LICENSE AGREEMENT IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software only in its unmodified and binary form, (with the accompanying documentation, the “Software”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Software has been provided, subject to the following conditions: (a) Licensee may not disclose, distribute or transfer any part of the Software, and You agree...
  • Page 61 U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide the Software to the U.S.
  • Page 62 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Page 63 ASRock follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock product is in line with global environmental regulations. In addition, ASRock disclose the relevant information based on regulation requirements.

Table of Contents