VocoPro KJ-7800 PRO User Manual page 19

Advanced Operations Cont...
Master Cueing
Master Cueing will cue the MASTER OUTPUT to the headphones. This is commonly used to isolate the
audio signal to the headphones. Master cueing makes it possible to practice when "audible" music is not
permitted i.e. late night practicing at home. To MASTER CUE, make sure the CUE/MASTER button is set
to MASTER and adjust the CUE LEVEL control to a desired volume level. Note: When master cueing, press-
ing any channels individual Cue button will not affect output to the headphones as those buttons only work
when channel cueing.
CUE MASTER
Crossfader
Crossfading between sources
The crossfader allows you to "mix" or crossfade between two channels while toggling between corresponding
video outputs. To do this, you need to first ASSIGN the two channels to your CROSSFADER. On each side of
the CROSSFADER, there is an ASSIGN button. The LEFT ASSIGN button can assign either CHANNEL 1 or
2, while the RIGHT ASSIGN button can assign either CHANNEL 2 or 3. Once you have your desired channels
assigned, move their respective CHANNEL FADERS to an audible level, and slide the CROSSFADER back and
forth to crossfade.
Note: If you assign channel 2 on both sides, the crossfader will not crossfade.
Record
Recording a Performance or Mix
To RECORD a mix or performance, connect a line-level patch cable from the RECORD OUT to the AUDIO IN
of a recording device.
RECORD
1 2
ASSIGN
L
R
5
Level
0
CUE
Phones Level
MASTER
2
ASSIGN
CASSETTE/DAT/
CD BURNER
19
10
Increase Decrease
3