Parts And Functions (Music Module) - VocoPro KJM-8000 PRO Owner's Manual

BAL
BAL BAL
12
PARTS AND FUNCTIONS
(Stereo/Music Module)
1
1. Source Selector: Phono/Line This allows the user to connect two players
without video output. The source selector switch makes it possible to switch
easily between players by "toggling" it to the desired position.
2
2. Source Selector: DVD/LD/CD This allows the user to connect up to three
players with video output. The source selector switch makes it possible to
switch easily between players by "toggling" it to the desired position.
3
3. Gain: This controls the input level for players connected to the
corresponding channel. It can be adjusted from 20dB to 60 dB.
4
4.
High EQ: This controls the level for a preset high frequency range. Use this
control to boost or reduce the high end frequencies in the music signal.
5
5.
Mid EQ: This controls the level for a preset mid frequency range. Use this
control to boost or reduce the mid frequencies in the music signal.
6.
Low EQ: This controls the level for a preset low frequency range. Use this
6
control to boost or reduce the low frequencies in the music signal.
7. Balance: This control balances the music signal between the left and right
7
channels.
8.
Cue: This button monitors the input signal from the board to the headphones.
Press this button to hear only that channel through the headphones. Note: if
8
you have pressed more than one channel cue, those channels will be audible as
well.
9.
9 Channel Fader: The fader raises or lowers the music volume of that
particular channel.
10. Key Control Switch: This switches the music between the Master channel
10
and the Key Control. Important: In order to use the key control feature
the switch must be in the down position.
11.
Cross Fader Assign Toggles: These toggles work in conjunction with the
Cross Fader slide control. They allow the user to select the channels to be
included in the "cross fade".
12. Cross Fader Slide Control: The slide control allows the user to fade the
music out from one source and fade in to another source to creating a
11
"blending" effect of the music.
5