Parts And Functions (Microphone Input Module) - VocoPro KJM-8000 PRO Owner's Manual

PARTS AND FUNCTIONS
(Microphone Module)
12
11
13
1. Gain: This controls the input level for the "LINE" and "XLR" microphone
inputs for the channel. It can be adjusted from 20dB to 60 dB.
1
2.
High EQ: This controls the level for a preset high frequency range. Use this
control to boost to reduce the high end frequencies in the microphone signal.
Note: Feedback can be eliminated or reduced by lowering the amount of high
2
frequencies in the channel.
3.
Mid EQ: This controls the level for a preset mid frequency range. Use this
3
control to boost or reduce the mid frequencies in the microphone signal.
4.
Low EQ: This controls the level for a preset low frequency range. Use this
4
control to boost or reduce the low frequencies in the microphone signal.
5. Individual Channel EQ On/Off Switch: Use this switch to turn on or off
5
the EQ you have set on the Master control panel, for each corresponding
channel.
6
6. Digital Echo: This controls the amount of digital you have set on the Master
control, for each corresponding channel
7.
7
Pan: This control pans (balances) the microphone output to the left or right
for the corresponding channel.
8.
Cue: This button monitors the input signal from the board to the headphones.
8
Press this button to hear only that channel through the headphones. Note: if
you have pressed more than one channel cue, those channels will be audible as
well.
9
9.
Channel Fader: The fader raises or lowers the microphone volume of that
each corresponding channel.
Talkover Attenuation: This control is part of the "talkover" feature. It
10.
allows the user to set the amount of music to suppress while the
announcer is speaking, thus being able to "talk over" the music.
10
11.
Talkover Hold Time: This control is part of the "talkover" feature. It
allows the user to set the amount of time it takes to return the music to normal
volume once the announcer has finished speaking. This feature works in the
"Auto" mode only.+
12.
Talkover Assign: This control is part of the "talkover" feature. It
allows the announcer to select the channel he/she wishes to "talk over" on.
13.
Auto Off On: This control is part of the "talkover" feature. It
allows the user to use the talkover feature automatically or by choice. Note:
The talkover feature will only work when the music source is set to
"Master 1"
4