Table of Contents
Advertisement
Empty the water container after every use. Not
doing so will affect the drying performance.
NOTE
• If the water container is full, the
and a chime will sound while the appliance is
operating. If this should occur, the water
container needs to be emptied within the next
hour.
• When the condensed water is drained out
directly through the optional drain hose, there is
no need to empty the water container.
1
Pull out the water container.
2
Empty the water container into the sink.
CAUTION
• Do not drink the condensed water or reuse it. It
could be lead to health problems for people and
animals.
3
Refit it back into the appliance.
• Push in the water container fully into the
appliance until it is in place.
4
Cleaning the Appliance
Periodically
E
icon glows
Wiping the Moisture Sensor
This device senses the moisture level of the clothes
during operation, which means it must be cleaned
regularly to remove any build-up of lime scale on
the surface of the sensor.
Wipe the sensors inside the drum.
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a dry
rough acrylic sponge.
Cleaning the Cool Air Inlet Grill
Vacuum the cool air inlet grill 3 - 4 times a year to
make sure there is no build up of lint or dirt that
may cause improper air flow.
NOTE
• Warm air is expelled through the ventilation grill.
MAINTENANCE
Press the Start/Pause button.
CAUTION
33
Advertisement
Table of Contents
