Video Connections - VocoPro DVG-555K Owner's Manual

Getting connected cont

VIDEO CONNECTIONS

Connecting to a Dolby Pro Logic Amplifier
Connecting to a TV with S-video
Using an S-Video cable, connect one end to the DVG-555K's S-VIDEO OUTPUT jack and connect the other
end to the S-VIDEO IN jack on your television.
Connecting to a TV with Component Video
Using 3 appropriate Component Video cables (usually color coded red, blue and green), connect a set of
plugs to the COMPONENT VIDEO OUT jacks (Y/Cb/Cr) on the DVG-555K and plug the other set of plugs to
the COMPONENT VIDEO IN jacks (Y-U/Cb-V/Cr) on your television.
On some TVs, the component video input jacks may be labeled differently (i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/
B-Y/Y etc.). You will need to press the MODE button on the remote control to toggle between non-interlaced
(HDTV) and interlaced (STANDARD) video output. You can only use the MODE button when there is no disc
inserted in the disc tray.
Connecting to a Monitor using VGA
Using a VGA cable, connect one end to the DVG-555K's VGA output jack and connect the other end to the
VGA IN jack on your HDTV/VIDEO monitor
Connecting to an TV with Component Video
Connecting to an TV with S-Video
.
Television/Monitor
9
Television
Serial No.
Manufactured under License from Dolby Laboratories
DOLBY PRO LOGIC and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
VGA
trademarks of Dolby Laboratories. Confidential
Manufactured under License from Dolby Laboratories
DOLBY PRO LOGIC and the double-D symbol are
Connecting to Monitor using VGA