Advertisement
Quick Links
Quick Installation Guide
10/100/1000Mbps PCI Adapter
Model # AGIGA32PCI
Section 1
1
Installing Hardware
Step 1
Shut down the computer, unplug its power cord, and remove the chassis
cover.
Step 2
Insert the Ethernet card into a PCI slot on the computer and secure it with
a chassis screw.
Step 3
Cover the computer's chassis.
Step 4
Connect an Ethernet cable to the RJ-45 port of the Ethernet card.
Step 5
Re-plug the power cord and turn on the computer.
Ver. 2A
Package Content:
• 32-bit PCI Gigabit Ethernet
Card
• Driver Disk
• Quick Installation Guide
Section 2
Installing Driver
Note: The following steps and screen shots are for
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Step 1
At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.
Windows 2000: Click Next at the Found New Hardware Wizard. Select
Search for a suitable driver for my device (recommended) and click Next.
Windows ME: Click Next at the Add New Hardware Wizard. Select Specify
the location of the driver (Advanced) and click Next.
Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search
for the best driver for your device (Recommended) and click Next.
Advertisement
Related Manuals for Airlink101 10/100/1000Mbps PCI Adapter AGIGA32PCI
Summary of Contents for Airlink101 10/100/1000Mbps PCI Adapter AGIGA32PCI
-
Page 1: Installing Driver
Quick Installation Guide 10/100/1000Mbps PCI Adapter Model # AGIGA32PCI Section 1 Installing Hardware Step 1 Shut down the computer, unplug its power cord, and remove the chassis cover. Step 2 Insert the Ethernet card into a PCI slot on the computer and secure it with a chassis screw. - Page 2 Step 2 Insert the provided driver disk. Select Search for the best driver in these locations, type in A:\WinXP and click Next. Section 2 Windows 2000: Insert the provided driver disk. Select Specify a location and click Next. At the copy manufacturer’s files from field, type in A:\Win2k and click OK.
- Page 3 Step 4 Click Continue Anyway at the Windows Logo Compatibility message. Windows 2000: Click Yes to continue. Windows ME: Insert the Windows ME CD-ROM and click OK. Windows 98SE: Insert the Windows 98SE CD-ROM and click OK. Step 5 Click Finish. Restart your computer. Windows 2000: Click Finish.
-
Page 4: Technical Specifications
Copyright © 2004 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101.