Table of Contents
Advertisement
10. OPTIONS
10.1 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
10.2 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
10.3 Anti-Allergy
Set this option with white Cottons items
programme. When the option is selected,
neither the temperature or the cycle time
can be changed. Option Time Save
and Extra silent
The corresponding indicator above the
touch button illuminates.
This option removes micro-organisms
thanks to a washing phase with the
temperature maintained above 60°C for
several minutes. This helps in removing
germs, bacteria, micro-organism and
particles. The addition of vapour together
with an additional rinsing phase ensures
a proper removal of detergent residues
and pollens/allergenic items, making it
suitable for delicate and sensitive skins.
are not available.
10.4 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
This option can also be used
to shorten the Steam
programme duration.
10.5 Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance
does not heat the water).
10.6 Spin
When you set a programme, the
appliance automatically selects the
maximum spin speed.
Touch this button repeatedly to:
• Decrease the spin speed.
The display shows only
the spin speeds available
for the set programme.
• Activate the Rinse Hold option .
The water of the last rinse is not
drained out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum and the
final spin phase is not performed.
The display shows the indicator
The lid stays locked. The drum turns
regularly to reduce creasing. You
must drain the water to unlock the lid.
ENGLISH
19
.
.
Advertisement
Table of Contents
