Sony HVR-Z7N Service Manual page 285

3-20. Pendulum Ass'y
1. Removal procedure
1) Remove the washer 1 from the pendulum shaft.
2) Remove the pendulum ass'y 2 from the relay gear hole.
Pendulum shaft
Relay gear hole
Points
to be noted
Do not re-use the washer.
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
2. Attachment procedure
1) Install the pendulum ass'y 2 to the relay gear hole.
2) Install the washer 1 to the pendulum shaft.
(Do not re-use the washer.)
2 Pendulum ass'y
1 Washer
6-101
Pendulum gear ass'y
Key Points
in Re-assembling
S-reel
After installation, move it toward
the S-reel side.
Mecha chassis section
(rear view)
Washer