Connecting A Computer - Vizio VSB210WS User Manual

VIZIO VSB210WS User Manual

Connecting a Computer

Connecting a Connecting a Connecting a
*Digital Connection:
If your Computer has a SPDIF (optical) digital audio output, you can connect it to the OPTICAL AUDIO IN
on the HD Sound Bar System
1. Turn off the power to the HD Sound Bar System and Computer.
2. Connect one end of the Optical (SPDIF) cable to the digital audio output on the Computer.
3. Connect the other end of the Optical (SPDIF) cable to the Digital audio input on the HD
Sound Bar System.
4. Turn on the power to the HD Sound Bar System and Computer.
5. Select the Optical input by pressing the Input Button on the top of the HD Sound Bar
System or Remote Control.
Note: When using the Optical Input on the HD Sound Bar System, be sure to set the source device
output mode to PCM. Refer to the Computer user manual for more information about the audio output
settings of the product.
*SPDIF Cable available separately.
Analog Connection:
1. Turn off the power to the HD Sound Bar System and Computer.
2. Connect one end of the audio cable to the analog audio output on the Computer*.
3. Connect the other end of the audio cable (white and red connectors) to one of the analog
audio inputs on the HD Sound Bar System.
4. Turn on the power to the HD Sound Bar System and Computer.
5. Select the associated input by pressing the Input Button on the top of the HD Sound Bar
System or Remote Control.
*Note:
Computer analog audio output commonly uses a 1/8" Stereo Mini-Jack port. In this configuration,
a 1/8" Stereo Mini-Jack to RCA stereo cable will be required.
Computer Computer Computer
www.VIZIO.com
16