Sound Bar Modes; Hub Mode; Client Mode; Hub/Client Mode Leds - Vizio VHT510 User Manual

VIZIO VHT510 User Manual
Dolby and SRS LEDs—
LED
Color
Blue
Dolby Digital signal is detected
Orange
DTS signal is detected
No Digital Audio input
Off
Flashing

Sound Bar Modes

Your VIZIO Sound Bar has two modes: Hub Mode and Client Mode. Use the switch on the back of your
Sound Bar to set the mode. See Sound Bar Connections on page 7 to see the location of the switch.

Hub Mode

If you have only one Sound Bar, set the switch to Hub mode. If the switch is in Client mode, your Sound
Bar will not be able to communicate with the subwoofer.

Client Mode

If you purchase additional products with VIZIO HD Wireless Audio technology in the future, consult those
user manuals for the best way to wirelessly connect them to your Sound Bar. Your Sound Bar should only
be operated in Client Mode if recommended by the accessories user manual.

Hub/Client Mode LEDs—


Lights blue when your Sound Bar is in Client Mode.

Lights orange when your Sound Bar is in Hub Mode.

Flashes slowly when your Sound Bar cannot find a suitable network (as a Client) or is the only
device currently in the network (as a Hub).

Flashes quickly when your Sound Bar is pairing. For a Hub device, pairing overrides the link
state and your Sound Bar may indicate that is it pairing even if it is already connected with other
devices in the network.
Position 1
decoding
N/A
www.VIZIO.com
Position 2
SRS TruSurround HD enabled
(best for movie/TV content)
SRS WOW HD enabled (best
for music content).
No SRS Processing
N/A
16
Position 3
SRS TruVolume
Enabled
N/A
SRS TruVolume
Disabled
N/A