Top Panel Buttons - Vizio VHT210 User Manual

VIZIO VHT210 User Manual

Top Panel Buttons

Power ( ) Press to turn your Sound Bar
on and off.

Press and hold for 3 seconds to put the
Sound Bar into standby mode. The
indicators turn off.
Input

Press repeatedly to step through the
input sources in the following sequence:
IN (Analog In), Optical In, or iPod, if a
VIZIO wireless iPod dock is paired with
the Sound Bar. Go to
more information.

Press and hold for 3 seconds to put the Sound Bar into pairing mode. See Pairing on page 15 for
more information on pairing.
Vol + / - —Press to turn the speaker volume up or down.
Remote Control Sensor—The sensor is located to the right of the LED window. Point the remote control
directly at this window for the best response to the remote signal.
Button Combinations:
Some buttons, when pressed in combination with other buttons will perform other procedures.

Volume Up + Volume Down: Press and hold for one second to mute the Sound Bar.

Power + Volume Up + Volume Down: Press and hold for 10 seconds to return the Sound Bar
to factory default mode.
Important: DO NOT ATTEMPT to remove the speaker grill as it will void your warranty.
www.vizio.com for
www.VIZIO.com
8