Light - Siemens K59 D Series Installation Instructions And Instructions For Use

Table of Contents

Advertisement

Cleaning the ice cube container
If ice cubes have not been dispensed for a prolonged
period, they will shrink, have a stale taste and stick
together.
Pull out the container, empty and clean with lukewarm
water.
m
Caution
A full ice cube container is heavy!
After cleaning, dry the container and feed screw
thoroughly to prevent the new ice cubes from sticking.
Inserting the ice cube container
Push the ice cube container all the way back onto
the supports until it locks into position. Ice cube
production continues.
Note
If the container cannot be pushed all the way back,
twist the screw conveyor in the container or remove
frozen ice cubes from the area of the shelf.

Light

(not all models)
Light (LED)
Your appliance features a maintenance-free LED light.
These lights may be repaired by customer service
or authorised technicians only.
Change LED bulb in cooling compartment
1. Switch off the appliance with the On/Off button.
2. Pull out the mains plug or switch off the fuse.
3. Remove the cover strip.
4. Change the LED bulb (LED replacement bulb:
220-240 V AC, E14 bulb holder, see defective bulb
for wattage).
5. Reattach the cover strip.
en
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

K59 n series k5930d1gbK5930d1gb/05

Table of Contents