LG 55LJ55 Series Owner's Manual
Hide thumbs
Also See for 55LJ55 Series:
- Service manual (53 pages) ,
- Service manual (53 pages) ,
- Owner's manual (23 pages)
Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain
it for future reference.
www.lg.com
P/NO : MFL69652110 (1706-REV01)
*MFL69652110*
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Advertisement
Table of Contents
Related Manuals for LG 55LJ55 Series
Summary of Contents for LG 55LJ55 Series
- Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com P/NO : MFL69652110 (1706-REV01) *MFL69652110* Copyright © 2017 LG Electronics Inc. All Rights Reserved.
- Page 2 Warning! Safety instructions • Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. • Insert power cable plug completely into wall socket otherwise if CAUTION not secured completely into socket, fire ignition may break out.
- Page 3 • Only use an authorized AC adapter and power cord approved by product. LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. • Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
- Page 4 Preparing • Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. • If the TV is turned on for the first time after it was shipped from •...
-
Page 5: Lifting And Moving The Tv
Lifting and moving the TV • Do not use any unapproved items to ensure the safety and product life span. Please note the following advice to prevent the TV from being scratched • Any damage or injuries caused by using unapproved or damaged and for safe transportation regardless of its type and size. -
Page 6: Using The Button
Using the button Mounting on a table You can simply operate the TV functions, using the button. 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. -
Page 7: Mounting On A Wall
We recommend the use Stand hole of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 8: Connections (Notifications)
Connections (notifications) Adapter connection (Depending on model) Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s • Please be sure to connect the TV to the AC-DC power connection, refer to the manual provided with each device. -
Page 9: Remote Control
Remote control (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. (Search) Search for content such as TV programmes, movies and (Some buttons and services may not be provided depending on models other videos, or perform a web search by entering text in the search or regions.) bar. -
Page 10: Magic Remote Functions
Magic remote functions (POWER) Turns the TV on or off. You can turn your set-top box on or off by adding the set- top box to the universal remote control for your TV. (Some buttons and services may not be provided depending on models Number buttons Enters numbers. -
Page 11: Open Source Software Notice Information
How to register the magic remote LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such To use the Magic Remote, first pair it with your TV. -
Page 12: Troubleshooting
Troubleshooting Abnormal Display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with Cannot control the TV with the remote control. product. •... -
Page 13: Specifications
Manufacturer : Chicony • For consideration of the user, this device should be installed and Model : A16-048N2A operated with a minimum distance of 20 cm between the device Manufacturer : LG Innotek and the body. Model : PSAC-L655 (Only LJ55**, LJ57**) - Page 14 CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 1 Only Satellite models.
- Page 15 Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. •...
- Page 16 19960 in Egypt Refer to the label on the back cover and quote this 021 36 54 54 in Algeria information to your dealer when requiring any service. Other countries, Please contact our MODEL local dealer or log into SERIAL http://www.lg.com...
- Page 17 5 If the connection is successful, the "Connected Wheel (OK) button on the by pressing the to Internet" is displayed. remote. NETWORK Picture Sound TV Name [LG] WebOS TV Wired Connection (Ethernet) Programmes Not Connected Wi-Fi Connection Connected to Internet Network Wi-Fi Direct LG Connect Apps...
- Page 18 Picture Network / (The MAC address displayed on the right Sound TV Name Sound ꔐ WI-FI : AAA [LG] WebOS TV pane of the network status window should be WI-FI : BBB Wired Connection (Ethernet) Programmes Programmes WI-FI : CCC Not Connected registered with your Internet service provider.)
- Page 19 1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices.
- Page 20 1 Miracast should be set to "ON" on your portable device. 2 When your TV is detected, select the device on your portable device. When connection is completed, the device screen appears on the TV screen. Please call LG Customer Service if you experience any problems.
-
Page 21: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 22: Key Codes
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... - Page 23 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
-
Page 24: Customer Computer
EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &... -
Page 25: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... - Page 26 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 27 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 28 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
- Page 29 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
- Page 30 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
- Page 31 11 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. 24. Input select (Command: x b) Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
- Page 32 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.