Setting Up The Home Connect App; Setting Up Home Connect; Remote Start - Siemens SN73HX42VE/43 Information For Use

depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
Please consult the documents sup-
¡
plied by Home Connect.
Please also follow the instructions
¡
in the Home Connect app.
Note: Please note the safety precau-
tions in this instruction manual and
make sure that they are also ob-
served when operating the appliance
via the Home Connect app.
→ "Safety", Page 4
16.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
16.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
The appliance is receiving signals
¡
from the WLAN home network (Wi-
Fi) at its installation location.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Open the Home Connect app and
1.
scan the following QR code.
1
)
Follow the instructions in the
2.
Home Connect app.
16.3 Remote Start
You can use the Home Connect app
to start the appliance with your mo-
bile device.
Tip: If you select "rc2" in the Basic
settings → Page 36 of this function,
the function is permanently activated
and you can start your appliance with
a mobile device at any time.
Activating Remote Start
When you have selected "rc1" in the
basic settings of this function, activ-
ate the function on your appliance.
Requirements
The appliance is connected to your
¡
WLAN home network.
The appliance is connected to the
¡
Home Connect app.
"rc1" is selected in the Basic set-
¡
tings → Page 36 of this function.
A programme is selected.
¡
Press ⁠ .
▶
If you open the appliance door, the
function is automatically deactiv-
ated.
button lights up.
a
Tip: To deactivate the function, press
⁠ .
Home Connect en
37