Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VO320E User Manual

VIZIO VO320E User Manual

Chapter 1 Basic Controls and Connections

Front Panel

1. POWER 'VIZIO' LIGHT–
The VIZIO name lights white
when powered on and orange
when powered off.
2. REMOTE CONTROL
SENSOR – This is
window through which all of
the remote control signals
pass to the sensor. Point the
remote control directly at this
window for the best response
to the remote signal.

Side Panel Controls

POWER (
button again to the HDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will proceed to the next level.
CH + / - – Use these buttons to step up or down the TV channels. While the OSD is
active, these buttons function as up and down controls in the OSD menus.
VOL + / - – Use these buttons to increase or decrease to the speaker volume.
While the OSD is active, these buttons function as left and right controls in the OSD
menus.
INPUT (ENTER) – Repeated pressing of this buttons steps
through the input sources in the following sequence: TV,
AV1/S-Video, AV2, Component1, Component2, RGB, HDMI 1,
and HDMI 2. Once you have stepped through the entire
sequence, you will return to the beginning. If a sub-menu is
active, pressing this button will return to the previous menu
level.
Additionally, when the OSD is active, this button confirms the
menu function to be adjusted. When the OSD is not active, pressing this button will display the current
input mode.
the
) – Switch the HDTV on by pressing the button once. Press the
www.VIZIO.com
10