Operating Voltage - Sony TC-RX60ES Operating Instructions Manual

ed g=vors lbp i(e) ats
On safety
¢ Before operating the unit, make sure that the operating
voltage of your unit is identical with that of your local
power supply.
¢ Should anything fall into the cabinet, unplug the unit
and have it checked by qualified personnel before
operating it any further.
e Unplug the unit from the wall outlet if it will not be
used for a long time. To disconnect the cord, pull it out
by grasping the plug. Never pull the cord itself.
¢ The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
¢ The nameplate indicating operating voltage, power
consumption, etc. is located on the rear.
On operation
e When the unit is not used, turn the power off, to
conserve energy and to extend the useful life of your
unit.
* Because of the safety mechanism, the function buttons
will not operate if the cassette holder is not completely
closed, if there is no cassette, or if a cassette has
been incorrectly inserted into the cassette holder.
On head cleaning
The heads and tape path should be cleaned after 10
hours of operation. Dirty heads and a dirty tape path may
cause:
Loss of high frequency response
Loss of sound volume
Sound drop-out
'If you have any questions or problems concerning your
unit, please contact your nearest Sony dealer.
Operating Voltage
Before connecting the unit to the power source, check
that the operating voltage of your unit is the same as the
local power line voltage.
| Where purchased | Operating
European
countries
(or 240 V
AC adjustable by authorized Sony
personnel), 50/60 Hz
Operates on 240 V AC (or 220 V
AC adjustable by authorized Sony
personnel), 50 Hz
United Kingdom
Canada
Operates on 120 V AC, 60 Hz