Setting The Aspect Ratio - Panasonic PT-AE500U Operating Instructions Manual

Setting the aspect ratio (ASPECT)
This projector allows you to change the aspect ratio to match the type of
input signal.
Press the ASPECT button.
• Pressing the ASPECT button will change the
aspect ratio according to the successive settings
shown below.
• Illustrations for aspect ratio settings are shown
on the next page. Refer to this illustration for
assistance in selecting a suitable aspect ratio.
AUTO-_4:3-_I 6:9-')JUST-')ZOOM
4:3-'t,16:9-_V SCROLL
4:3"t'16:9
(When a 525p/625p signal is being input)
4:3,,+16:9-_JUST-I, ZOOM
• When set to "AUTO", the aspect ratio will be automatically selected if the
input signal has a detector signal.
4:3
16:9
JUST
ZOOM
V SCROLL
XGA/MXGA/SXGA/
WIDE768 only)
4:3 input signal
Squeezed signal (image
contracted horizontally)
4:3 input signal
Letterbox signal
4:3 input signal
4:3
Horizontal expansion of
projected image
Horizontal expansion ofprojected image
Center ofimage i sless distorted.)
Expansion preserves
original ratio
A picture is projected withoutexpansion
or reduction. (Vertical p ositioncanbe
adjusted bythe • and• buttons.)
28-ENGLISH ENGL_H-29