Royal Sovereign RBC-ES240-CA Owner's Manual page 12

PRODUCT OPERATION
7. Value Counting:
This bill counter is equipped with Value Counting feature. In Value Counting setting,
the bill counter will show the total by denomination, the total value and total amount.
Each denomination must be counted separately.
To set to value counting mode,
Press "ADD". Next on the control panel press the denomination to be counted
1.
($5 - $100 for Canadian currency, $1-$100 for US Currency).
2. Insert the banknotes to be counted
3. After the denomination is counted, press on the control panel the next denomination
to be counted ($5 - $100 for Canadian currency, $1-$100 for US Currency).
4. Continue Step 3 until all denominations needed to be counted are complete.
Press "REPORT" to view the total number of bills, the value of each denomination
5.
and the total value.
Important note: If you wish to print the report, proceed to the Print section of
this manual below.
6. To Exit Value Counting setting, press "CF"
PRINT:
Print function is used in Value Counting feature to allow you to print the totals that show
in the REPORT.
To use print function, you will require an printer with RS-232 interface (not included).
Refer to your printers users manual and in the MENU option, set the BPS to correct the
PRINTER INTERFACE.
1. To print, ensure you are in REPORT Screen. Press "PRINT" to print the report
11
(CONTINUED)