Tally On/Off During Motion Security Recording.33 - Panasonic Palmcorder PV-D407 Operating Instructions Manual

Special Features
Tally ON/OFF during Motion Securit^Recording\
You can choose to have the Tally lamp come on or stay off during Motion Security
recording. The Palmcorder is set to Jfrnm the factory.
Before you begin...
♦ Connect the Palmcorder to a power source.
• Insert a cassette with record tab (see page 10).
Continue holding down the
SECURITY MODE button before and
after turning the POWER switch to
CAMERA until the SECURITY MODE
menu screen is displayed.
Press UP A or DOWN ▼ to select
IHII'IIJfil JeJElor
DISPLAY
1
-SECURITY MODE-
TALLY LAMP OFF
SELECT: PUSH T/A KEY
SET : PUSH DISPLAY KEY
Tally Lamp comes on during Motion
Security recording.
Tally Lamp stays off during Motion
Security recording.
3
Press the DISPLAY button to set your
selection and exit this screen.