Setup Menu - Vivitar Vivicam 6300 User Manual

Setup Menu

This feature allows you to set up the default settings by preference for using your ViviCam 6300.
Set-up1 Set-up2 Set-up3
Format
Beeper Louder
Date & Time m/d/y
Y/M/D
Language English
Set :
1 / 4
1. Rotate the mode dial to
2. Press ,then use
3. Use or to select the desired option item, then press the
4. To exit from the setup menu, rotate the mode dial to other desired mode again.
[Set-up1] settings
Item Functional Description
Format Erases all images and reformats the SD card loaded in your ViviCam 6300. Protected
images are also erased. SD card cannot be formatted if it is write-protected.
Refer to the section in this manual titled "Formatting an SD Memory Card or Internal
Memory" for further details.
* Yes / No
Beeper This sets whether or not to mute the startup sound, and the camera sound each
time you press a camera button.
* Louder / Soft / Off
Date & Time This sets the date and the time.
Refer to the section in this manual titled "Setting the Date and Time" for further details.
Y/M/D
Language Sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled "Choosing the Screen Language" for further details.
* English / Français / Deutsch / Español / Italiano /
EN-68
Set-up2 Set-up3
Set-up1
PC
USB Mode
NTSC
TV NTSC
PAL
LCD Brightness
Auto Shut Down 3 Min.
Set : Set :
1 / 4
(Setup) mode and turn your ViviCam 6300 on.
or to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
Set-up2
Set-up1 Set-up3
Reset Number
1
Set to Default
V.
Version
1 / 3
button.
/