Vivitar Vivicam 3935 User Manual page 74

Power off time
If the ViviCam 3935 remains unused for a specified period of time while the camera is powered
on, the camera will switch to an "idle" mode, and eventually turn itself off to conserve the power.
Inactivity period
(Batteries)
60 seconds
E
3 minutes
If the camera is idle, re-activate the camera by pressing any button or rotate the mode dial. If
the camera has powered-off then you must turn the camera on again by sliding the POWER
switch. To change the power saving interval when the camera is charging with batteries,press
/ button in the main menu or press
and choose the setting. Then select the power-off interval you prefer by using the
button and then OK button to confirm.
[3 min], [5 min], [10 min], [30 min]
The ViviCam 3935 defaults to [3 min].
Set to defaul
t
If you wish to restore all ViviCam 3935 settings to their original
factory status, select this option and then press the OK button.
Then select [Yes] or [No] by using the
OK button to confirm.
74
Inactivity period
(AC Power Adapter)
60 seconds
30 minutes
/ button and then OK button to enter the sub-menu
/ button and then
Camera Status
Stay Idle
Shut Off
/