Using An Sd Memory Card (Optional Accessory) - Vivitar Vivicam 3785 User Manual

Using an SD Memory Card (Optional Accessory)

Your Vivicam 3785 comes with approximately 6MB of internal memory,
allowing you to store images and video clips in the Vivicam 3785. However,
you can expand the memory capacity by using a Secure Digital (SD) memory
card. Optional SD memory cards provide removable, reusable storage for
images and video clips.
1. Make sure your Vivicam 3785 is off.
2. Open the SD card/battery cover.
3. Insert the SD memory card. (Contact pins first)
If the card cannot be inserted, check the orientation.
4. Close the SD card/battery cover.
Note:
To prevent valuable data from being accidentally erased from
an SD memory card you can slide the write protect tab (on the side of the
SD memory card) to "LOCK".
To save, edit, or erase data on an SD memory card, you must unlock the card.
If a memory card is present in the Vivicam 3785; the camera will
automatically use the card in preference to internal memory.
Be sure to format the memory card with this Vivicam 3785 before its
initial usage.
The Vivicam 3785, like most digital cameras will automatically use a memory card if it is inserted into the
memory card slot. This is called °ßcard preference°®. Data stored in internal memory will not be accessible
if a memory card is present. To again access your data stored in internal memory, simply remove the SD card.
To remove an SD memory card
1. Make sure your Vivicam 3785 is off.
2. Open the SD card/battery cover.
3. Press lightly on the edge of the memory card and it will eject.
Note:
Memory cards may become warm during use; observe caution when removing memory cards.
When a memory card is removed from the Vivicam 3785; the camera will automatically revert to using internal
memory. 19
19
19 19