Disabling The 12-Volt System - Fisker OCEAN ELECTRIC Emergency Response Manual

Disabling the 12-Volt System

WARNING: Always use appropriate tools and wear appropriate PPE when
cutting the 12V ground cable. Failure to follow these instructions can result in
serious injury or death.
WARNING: Cutting the 12V ground cable DOES NOT completely disable the
high-voltage system. Continue to treat the high-voltage components as
energized even after disabling the 12V system.
1. Turn the vehicle OFF. See
2. Access the 12V battery. See
3. Locate and double-cut the 12V ground cable that runs from the 12V battery
negative terminal. Be sure to cut out a section of cable that is wide enough to
prevent the cut ends from accidentally touching and completing the electrical
circuit.
4. If time allows, wrap the cut ends of the cable in electrical tape as an additional
precaution against accidental reconnection.
2022 Fisker Ocean
3. Disable Direct Hazards / Safety Regulations
Powering Off, page
Accessing the 12V battery, page
21.
14.
31