Step 2: Connecting The Vivicam 3750 To Your Computer - Vivitar Vivicam 3750 User Manual

Step 2: Connecting the ViviCam 3750 to Your Computer

1. Connect one end of the USB cable to an available
USB port on your computer.
2. Connect the other end of the USB cable to the USB
connector on the camera.
3. The USB MODE menu appears on the screen.
4. Use the / button to select DISK DRIVE, and
press the OK button.
DISK DRIVE is displayed on the LCD monitor.
5. From the Windows desktop, double click on "My
Computer".
6. Look for a new "removable disk" icon.This
"removable disk" is actually the memory (or memory
card) in your camera. Typically, the camera will be
assigned drive letter "e" or higher.
7. Double click on the removable disk and locate the DCIM folder.
8. Double click on the DCIM folder to open it to find more folders.
Your recorded images and video clips will be inside these folders.
Copy & Paste or Drag-N-Drop image and video files to a folder on your computer.
Mac users: Double-click the "untitled" disk drive icon on our desktop. iPhoto may
automatically launch. The volume label may vary depending upon whether you use
internal camera memory, or a memory card.
Note:
When transferring images to the computer, there is no need to install any batteries into the
ViviCam 3750. The camera will automatically power on when connected to the computer via USB
cable.
EN-33