•
Make sure all batteries are fresh, or fully charged.
•
If the camera fails to start after inserting new batteries (nothing appears on the
Status LCD panel), the batteries may be inserted in wrong orientation.
•
The batteries may explode or cause burns if disassembled, recharged,
shorted, exposed to high temperature, or disposed of in a fire.
•
Ensure that the battery orientation is correct when placing them in the camera
•
Batteries may feel warm after being used for some time.
•
Remove the batteries if you will not use the camera for one month or longer.
Camera Features
1. Two-mega-pixel CCD image sensor
2. Maximum image resolution of 1600 x 1200 pixels
3. Two image resolution (Full and Half) and three image quality settings (High,
Normal and Economy)
4. Still images in common in JPEG file format
5. 1.5-inch color TFT LCD image display (312 x 230 pixels)
6. USB port for connection to a PC
7. Built-in four-mode flash (Automatic, On, Off, Red-Eye Reduction modes)
8. Compatible with Compact Flash Type 1memory cards (4MB to 256MB)
9. Tripod mounting socket (1/4" – 20)
10. Uses 4 x AA alkaline or Ni-MH batteries
11. Automatic Exposure Compensation and White Balance
12. 2X Digital Zoom
13. TV output port for connection to a TV
14. Slide show playback capability
15. Date/Time setting
16. Automatic power off to save battery power
17. Self-Timer with 10-second delay
18. Silent Movie capture mode (no audio or sound)
Computer System Requirements
•
PC with a 300MHz Pentium-class microprocessor and a CD-ROM drive
•
Windows 98SE / Me / 2000 / XP
•
64MB RAM
•
500MB of available hard disk space (for applications and images)
•
Color display monitor display supporting 16-bit color or better
•
Available USB port
3