Table of Contents
Advertisement
The images are blurry. The camera or
The personal
computer does not
recognize the camera
In Windows ME and
Windows 2000, when
the USB cable is
unplugged from the
PC, an "Unsafe
Removal Device
Detected" error
message appears.
subject was
moving when the
shot was taken.
The camera was
connected to a
personal
computer by
USB before
installing
software.
When removing
USB devices, it is
recommended
that users follow
the "Safe
Removal of USB
Device"
procedure.
Hold the camera steady or put it on a
tripod to take pictures.
Connect the camera to the computer
with the USB cable. Select [My
computer] > [Control panel] > [System]
> [Device manager]. From [other
devices] in [device manager], delete
[Composite USB device] or [unknown
device]. Disconnect the camera from
the computer, install the software, and
then reconnect the camera.
Procedure:
A.
Right-click the Unplug or eject
hardware icon at the bottom-right
of your computer screen.
B.
Left-click the Unplug or eject
hardware text box to bring up the
'Unplug or Eject Hardware'
screen.
C.
From the 'Unplug or Eject
Hardware' screen, select the
device to be disconnected and
then click the Stop button to bring
up the 'Stop a Hardware device'
confirmation screen.
D.
From the 'Stop a Hardware
device' confirmation screen select
the device to be stopped and click
OK to bring up the 'Safe To
Remove Hardware' confirmation.
E.
You may now disconnect the
Digital Camera from your PC.
47
Hide quick links:
Advertisement
Table of Contents
