Sony DVP-NS725P Operating Instructions Manual page 63

• DOWNMIX (DVD only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Displaying the
audio information of the disc" (page 45). This
function affects the output of the following
jacks:
- LINE OUT L!R (AUDIO) jacks
- DIGITAL OUT (OPTICAL or COAXIAL)
jack when "DOLBY DIGITAL" is set to
"D-PCM" (page 63).
DOLBY
;UR-
ROUND
Normally, select this position.
Multi-channel audio signals are
output to two channels for
enjoying surround sounds
NORMAL Multi-channel audio signals are
downmixed m two channels for
use with your stereo.
• DIGITAL OUT
Selects if audio signals are oulput via the
DIGITAL OUT (OPTICAL or COAXIAL)
jack.
ON Normally select this position. When
ou select "ON," see "Setting the
digital output signal" for further
settings.
OFF The influence of the digital circuit
upon the analog circuit is minimal.
Setting the digital output signal
Switches the method of outpmting audio
signals when you connect a component such
as an amplifier (receiver) or MD deck with a
digital input jack.
For connection details, see page 19.
Select "DOLBY DIGITAL" and "DTS" after
setting "DIGITAL OUT" to "ON."
noise (or no sound) will come out from the
speakers, damaging your ears or speakers.
4, DOLBY DIGITAL (DVD only)
Selects the type of Dolby Digital signal.
D-PCM
Select this when the player is
connected to an audio
comtxment without a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
"DOWNMIX" item in
"AUDIO SETUP" (page 63).
DOLBY Select this when the player is
DIGITAL connected to an audio
comtxment with a built-in
Dolby Digital decoder.
• DTS
(DVD only)
Mects whether or not to output DTS signals.
OFF
Select this when the player is
connected to an audio
component without a built-in
DTS decoder.
ON Select this when the player is
connected to an audio
component with a built-in DTS
decoder.
¢D
g
If you connect a component that does not
conform to the selected audio signal, a loud
63