Sony DVP-NS725P Operating Instructions Manual page 62

• PAUSEMODE (DVD only)
Selects the picture in pause mode.
AUTO
The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
FRAME The picture, including subjects
that do not move dynamically,
is output in high resolution.
• TRACK SELECTION (DVD only)
Gives the sound track which contains the
highest number of channels priority when you
play a DVD on which multiple audio formats
(PCM, DTS, or Dolby Digital format) are
recorded.
• When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 59).
• If you set "DTS" to "OFF" (page 63), the DTS
sound track is not played even if you set 'q'RACK
SELECTION" to "AUTO."
• If PCM, DTS, and Dolby Digital sound tracks
have the same number of channels, the player
sx_lects PCM, DTS, and Dolby Digital sound
tracks in this order.
• MULTI-DISCRESUME(DVD/VIDEOCD
only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be slored in
memory for up to 6 different DVD/VIDEO
CD discs (page 28).
ON Stores the resume settings in
memory for up to six discs (The
settings remain in memory even
if you select OFF.)
OFF Does not store the resume
settings in memory. Playback
restarts at the resume lx)int only
for the current disc in the player.
Settings for the Sound
(AUDIOSETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 58).
The default settings are underlined.
AUDIO SETUP
• AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the LINE
OUT L!R (AUDIO) jacks.
sound
• AUDIO DRC (Dynamic Range Control)
(DVDonly)
Makes the sound clear when the volume is
turned down when playing a DVD that
conforms to "AUDIO DRC." This affects the
output from the following jacks:
-LINE OUT L/R (AUDIO)jacks
-DIGITAL OUT (OPTICAL or COAXIAL)
jack only when "DOLBY DIGITAL" is set
to "D-PCM" (page 63).
STANDARD Normally select this position.
TV MODE
Makes the low sounds clear
even if you turn the volume
down.
WIDE Gives you the feeling of being
RANGE
at a live performance.
62