Vivitar Vivicam 3500 User Manual page 7

* Note 1: The above-mentioned numbers may be different depending
on the card actually used. The total number of images which can be
stored in the card may be more than or less than the number.
* Note 2 : After capturing, depending on the subjects, the displayed
number may not be always deducted by one.
* Note 3 : SanDisk and Pretec CF cards are recommended. Other
brands/makers are not tested with the camera.
* Note 4: When first time applying CF card to DC1500, please be sure
to format the card with the camera.
The camera displays "CARD FULL" if no more images can be stored
in the rest of memory under the selected quality mode. When the
displayed number is "0001" and try to capture a new image, the cam-
era may display "RETRY" message after the shutter release. This
means that the subject to be captured is too complicated to store in
the rest of memory. In this case, a user may retry the capture under
lower image quality mode.
The camera displays "? CARD" on the LCD in case the camera de-
tects that no card, unknown card, higher capacity card is inserted. To
use such card, it is first required to format it by the camera. (Caution
: All data in the card will be lost by formatting.)
10
42139-554-ARG 42139-554-ARG