JVC KW-XC410 Instructions Manual page 59

Indications
DIMMER
Dimmer
CONTRAST
Display contrast
TEL
Telephone muting
SCROLL*
1
Scroll
EXT INPUT* 2
External input
AUX ADJUST
Auxiliary input
level adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain
control
IF FILTER
IF filter
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
1
* 2 Cannot be selected if the source is "CD-CH" or "EXT."
Selectable settings, [reference page]
AUTO : [Initial]; Dims the display when you turn on the
headlights.
ON : Activates dimmer.
OFF : Cancels.
1 – 10 : Adjust the display contrast to make the display indications
clear and legible.
[Initial: 5]
MUTING1/MUTING2: Select either one which mutes the sounds while
using the cellular phone.
OFF:
[Initial]; Cancels.
ONCE : [Initial]; Scrolls the disc information once.
AUTO : Repeats scrolling (5-second intervals in between).
OFF : Cancels.
• Pressing DISP for more than one second can scroll the display regardless
of the setting.
CHANGER : [Initial]; To use a JVC CD changer [13], an Apple iPod,
or a JVC D. player [22].
EXT INPUT : To use another external component, [22].
AUX ADJ 00 – AUX ADJ 05: Adjust the auxiliary input level
accordingly, to avoid the sudden increase of the output
level when changing the source from external component
connected to the AUX input jack on the control panel.
[Initial: AUX ADJ 00]
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [15].
TAG OFF : Cancels.
You can change the maximum volume level of this unit.
LOW PWR : VOLUME 00 – VOLUME 30 (Select this if the
maximum power of the speaker is less than 50 W to avoid
damaging the speaker.)
HIGH PWR : [Initial]; VOLUME 00 – VOLUME 50
AUTO : [Initial]; Increases the tuner selectivity to reduce noise
interference between the stations. (Stereo effect will also
be lost.)
WIDE : Subject to noise interference from adjacent stations, but
sound quality will not be degraded and will retain the
stereo effect.
21