Vivitar Vivicam 3060 User Manual page 9

• Setting the Date, Time and Date Stamp:
You should set the Date and Time when you first use your camera or the
battery is removed for an extended time (approximately 120 minutes).
Use the following procedure to change the date and time setting.
1.Slide the Function switch to
2.Press the MENU button to turn on function menu.
Use ◄ or ► button to select [Advance] option
and press the Enter button to bring up the
advanced menu.
3.Use ▲ or ▼ to select [Date Time], and then
press the Enter button.
4.Press ▲ or ▼ to adjust the date and time. Press
◄ or ► to advance to the next setting.
5.When finished, press the MENU button to exit
the menu.
Use the Date Stamp setting to imprint the date on your pictures.
1.In the Date Time Setting menu. Make sure the camera clock is set to
the correct date.
2.Press ◄ or ► to select [Date stamp] option.
3.Press the Enter button to switch the Date stamp function to on or off.
4.Press the MENU button to exit the menu.
(Capture Function).
9