Table of Contents
Advertisement
Using Bluetooth pairing as an example, enable NFC, Huawei Beam, and Bluetooth on both devices.
Open the Bluetooth pairing screen on both devices and place the NFC detection areas of devices close
together. When the sending device plays an audio prompt and content on the screen shrinks, follow
the onscreen instructions and touch the screen on the sending device to establish a Bluetooth
connection
If there is a Read and write/P2P switch on the NFC screen, ensure it is also enabled. Features
may vary depending on your carrier.
Connecting USB Device
Transfer Data between Your Phone and Computer
Use a USB cable to connect your Phone to your computer and transfer data.
Select USB connection mode
Use a USB cable to connect your Phone to the computer, you can then select a default connection
method. You can transfer photos and files between your Phone and computer, or charge your Phone
through the USB connection to your computer.
Swipe down from the status bar to open the notification panel, then touchSettings and select a
method for connecting your device and your computer.
Transfer photos: Transfer photos between your Phone and computer.
l
Transfer files: Transfer files between your Phone and computer.
l
Charge only: Charge your Phone with just a USB cable.
l
Input MIDI: Use your Phone as a MIDI input device and play music on your computer.
l
Transfer data over a USB port
Connect your Phone to your Phone using a USB cable to transfer data and perform other tasks.
Transfer files: Media Transfer Protocol (MTP) is a type of transmission protocol for media files. You
l
can transfer files between your Phone and computer using this connection method. First, install
Windows Media Player 11 or later on your computer.
Swipe down from the status bar to open the notification panel, and then set your USB connection
method to Transfer files. Your computer will automatically install the necessary drivers. After the
installation is complete, click the new drive icon named Phone on the computer to view the files on
your Phone. You can use Windows Media Player to view the media files on your Phone.
Transfer images: Picture Transfer Protocol (PTP) is a protocol that allows you to transfer images.
l
You can upload and share photos between your Phone and computer using this connection
method.
Swipe down from the status bar to open the notification panel, and then set your USB connection
method to Transfer photos. Your computer will automatically install the necessary drivers. After
the installation is complete, click the new drive icon named Phone on the computer to view the
images on your Phone.
Device Connection
66
Advertisement
Table of Contents
