Yamaha Super Tenere ES 2020 Owner's Manual page 32

Instrument and control functions
Push and hold the menu switch
"MENU" for 2 seconds to enter the set-
ting mode. To exit the setting mode
and return to the normal display, push
and hold the menu switch "MENU"
again for 2 seconds.
Display
Grip Warmer
Maintenance
4
Time Trip
Unit
Display
Brightness
Clock
All Reset
Description
Set the low, middle, and
high settings to 10 tem-
perature levels.
Check and reset the "OIL"
oil change interval (dis-
tance traveled since last
oil change), and the
"FREE-1" and "FREE-2"
maintenance intervals.
Check and reset the
"TIME–2" and "TIME–3"
timers. These timers show
the total elapsed time that
the key has been in the
"ON" position. When the
key is turned to "OFF",
these timers stop counting
but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips ex-
ceed 99:59, they will reset
and continue counting.
Switch the multi-function
meter distance units be-
tween kilometers and
miles. When kilometers are
selected, the fuel con-
sumption units can be
switched between
"L/100km" and "km/L".
Arrange the items shown
in the 3 information display
pages.
Adjust the brightness of
the multi-function meter
unit.
Set the clock. The clock
displays time in 12-hour
format.
Reset all items, except the
odometer and the clock.
Adjusting the temperature levels of the
grip warmer settings
1. Use the select switch to highlight
"Grip Warmer".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU".
The grip warmer setting display
will be shown and "High" will flash
in the display.
Grip Warmer
Hi g h
Middle
Low
3. Push the menu switch "MENU".
The temperature level for the high
setting will start flashing.
Use the select switch to set the
temperature level, and then push
the menu switch "MENU". "High"
will start flashing.
4-15
10
5
1