Table of Contents
Advertisement
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (A) and (C) to scroll through the alarm
([AL-1] to [AL-4], [SNZ]) and hourly time
signal (
) screens until the one you want
to turn off is displayed.
Alarm number or hourly time signal
3.
Press (B) to turn off the displayed alarm or
the hourly time signal.
Each press of (B) toggles between on
●
and off.
Turning off an alarm causes
●
(alarm) to disappear from the display.
Turning off the hourly time signal
causes
(hourly time signal) to
disappear.
Note
If
(alarm) is still displayed after
●
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the
(alarm) indicator is no longer
displayed.
Watch Operation Guide 3553
Digital Compass
You can use the compass function to
determine the direction of north, and to
check your bearing to a destination.
Important!
Check the information at the link below
●
to find out how to ensure correct
readings.
Calibrating Compass Readings
l
Digital Compass Reading
l
Precautions
Taking a Compass Reading
1.
Enter the Compass Mode.
Navigating Between Modes
l
Entering the Compass Mode starts
●
compass readings.
2.
Keeping the watch horizontal, point 12
o'clock in the direction of your desired
objective.
The digital display shows one of 16 literal
direction indications and the bearing
angle.
To retrigger the compass operation,
●
press (C).
Interpreting Bearing Readings
Directions: N (North), E (East), W (West), S
(South)
Objective
Graphic direction pointer
North
Bearing angle to objective
Bearing to objective
The graphic direction pointer indicates
●
north, south, east, and west. The graphic
direction pointer indicating north consists of
three lines.
Graphic direction pointer (north)
West
South
East
Bearing angle
315°
0°
17
Advertisement
Table of Contents
