Table of Contents
Advertisement
Settings
These settings can be checked and edited if necessary:
Wi-Fi: used to identify and connect the device to available Wi-Fi networks.
l
Tap
to turn the device Wi-Fi on (
Wi-Fi network. Enter the network password using the alphanumeric keyboard then tap
APPLY CHANGES to confirm. The connected network IP address will be shown below
the network name.
Connections: used to join a cloud service; VIBXPERT 3 connects to eMaint condition
l
monitoring through Accelix™ the cloud-based data platform .
Date & Time: used to set time and date automatically or manually; set the 24-hour
l
format; show date on status bar
Tap
to turn on the desired function (
matically is on, manual edit (
When Set time automatically is off (
manually. Use the pop-up calender and the pop-up clock and set time and date respect-
ively. Tap SET TIME or SET DATE to confirm respective changes.
Language & Keyboard: used to change user interface (UI) language and UI keyboard
l
layout. Only one UI language can be set at a time but selection of several UI keyboard
layouts is possible. If several UI keyboard layouts have been selected, this keyboard
icon (
) is active. Tap
Tap LanguageorKeyboard then use the related drop-down to select UI language or UI
keyboard layout(s).
Units: used to set the measurement system to either metric or imperial. The accuracy in
l
decimal places is can also be set. If the units of any quantity is set to differ from the
selected measurement system, then the system name custom is shown.
VIBXPERT 3
indicates on). Tap the name of the required
indicates on). When Set time auto-
) is off.
indicates off), tap
to cycle through the available keyboard layouts.
On-board help
to set time and date
19
Advertisement
Table of Contents
