Pentax IQZoom Operating Manual page 15

When shooting, be sure to turn the main switch on.
1. Compose the picture by sliding the zoom lever,
and bring the autofocus spot 0 on the main part
of your subject.
• Be careful not to block the autofocus windows,
lens, light-sensor window, and flash head with
your fingers, hair, etc. while you are shooting.
2. When the green lamp next to the viewfinder
eyepiece lights up with a slight pressure on the
shutter button, you are ready to take a picture.
If the green lamp flickers, it warns that the
camera-to-subject distance is too short. Make
the distance a little longer.
• When the red lamp lights up, the camera is
automatically switched to flash photography.
3. As you depress the shutter button further, the
shutter will be released, and the film will be
automatically advanced to the next frame.
• When you change the subject to shoot, release
your finger from the shutter button, and redepress
the shutter button.
11