Pentax IQZoom Operating Manual page 11

5
4. Close the back cover, and the film will
automaticaily be wound and advanced to the
first frame. (Even without film in the camera,
the motor will work for about one or two
seconds as you close the back cover.)
• If neither exposure counter nor cartridge mark
appears in the LCD window, probably the film has
not properly been set in the camera; in such a case,
reload the film.
5, The cartridge mark appears in the LCD windo\A
and the film-transport mark flickers as the film
is wound. When the exposure counter is set to
"1/' the film winding stops automatically, witf
the LCD window showing as above.
Caution: Even when you wish to remove
the film from the camera before taking the
first picture, take the normal rewinding
procedures described on page 12, without
manually removing the film leader from the
take-up spool.