Table of Contents
Advertisement
INSIDE CABINET INSTALLATION
You will need: cylinder brackets (1).
A) Open the grill cabinet. The cylinder brackets snap into
the mounting holes in the bottom panel as shown in
the illustration (2). Insert cylinder bracket tabs into
rectangular slots. Secure brackets in place by pivoting
them down to lock centre tab in place.
B) Lift and place the cylinder between the cylinder
brackets (3) on the bottom panel. The base of the
cylinder must fit between the cylinder brackets (4).
C) Turn the cylinder so the valve opening faces the front
of the grill.
D) Connect the regulator to the LPG cylinder. Refer to
"CONNECTING THE REGULATOR."
LPG CYLINDER INSTALLATION INSIDE CABINET
1
2
3
4
WWW.WEBER.COM
®
13
Advertisement
Table of Contents
