Upper Cover; Front Panel Block - Akai MX-550 Service Manual

I.DISASSEMBLY
In case of trouble etc., necessitating dismantling, please dismantle in the order shown in the illustrations.
Reassemble in the reverse order.
1. Removal of the UPPER COVER
UPPER COVER
1) Disconnect the wires from J4 and J8 connectors on the
POWER SUPPLY PCB, P101,P102,J651,J652,J801 and
J802 on the DECK PCB, J2 on the MAIN AMP PCB.
—
_ 4, Removal of the CASSETTE MECHA BLOCK
|
| FRONT PANEL BLOCK
FRONT PANEL
1) Unhook the EJECT TORSION SPRING.
2) Remove the four MECHA BLOCK RETAINING SCREWS.
EJECT TORSION SPRING
ee SERVICE ANA
20