Opel Vivaro C 2023 Manual page 267

4. Set the jack to the necessary
height by turning the hand wheel.
Ensure that the edge of the body
fits into the notch of the jack.
With the jack correctly aligned,
jack up until wheel is clear of the
ground.
5. Unscrew the wheel bolts.
6. Change the wheel.
7. Screw on the wheel bolts.
8. Lower the vehicle and remove
jack.
9. Install the wheel wrench ensuring
that it is located securely and
tighten each bolt in a crosswise
sequence. Tightening torque is
115 Nm.
If the vehicle is equipped with
alloy wheel rims, note that the
wheel bolts can also be used for
Vehicle care
the steel spare wheel. In this case,
the spare wheel is secured by the
conical contact of each bolt.
10. Align the valve hole in the wheel
cover with the tyre valve before
installing.
Install wheel bolt caps.
11. Stow the replaced wheel 3 261,
the vehicle tools 3 251 and the
adapter for the security wheel
bolts.
12. Check the tyre pressure of the
installed tyre and the wheel bolt
torque as soon as possible.
265