Asus ROG SWIFT PG32UCDM User Manual page 26

•
The following function(s) will be disabled when this function turns on: Variable
Refresh Rate, PIP/PBP, ELMB.
• Blue Light Filter:
•
•
The monitor uses low blue light panel and compliance with TÜV Rheinland Low
Blue Light Hardware Solution at factory reset/default setting mode (Brightness:
65%, Contrast: 80%, CCT: 6500K, Preset mode: Racing mode, Power Setting:
YES).
The following function(s) will be disabled when this function turns on: ELMB.
•
•
•
•
•
3-4
Square: Provides multiple aspect ratio choices with different
screen sizes, including Full, Equivalent and Pixel by pixel.
OFF: No change.
Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated, the default settings of Racing
Mode will be automatically imported. Between Level 1 to Level
3, the Brightness function is user-configurable. Level 4 is an
optimized setting. The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
To minimize eye strain and dryness in your eyes, you should rest the eye
periodically by focusing on objects that are far away.
Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter reduces 70% (max.) harmful blue
light to avoid CVS (Computer Vision Syndrome).
Chapter 3: OSD (On-Screen Display) menu