Table of Contents
Advertisement
Playing in a Desired Order — Program Play
4
Press [> to start playback.
18
Skipping to the next selection programmed
Press DD1 during playback.
Going back to the beginning of the selection being
played
Press KCI during playback.
To stop program play
Press Mf. The last selection number programmed will be
displayed.
To resume playback, press &. Play begins from the
beginning of the program.
You can play the same program repeatedly as long as you do
not cancel program play or erase the program.
To program while observing the disc labels
You can program the selections with the dise table open.
To check the program contents
Press the CHECK button. Each time the button is pressed,
the program contents are displayed in the programmed
order.
To cancel program play
Press CONTINUE and return to the continuous playback
mode. The program will be erased.
To cancel all the selections programmed
Press @ to cancel in stop made.
If the disc table is opened or the power is turned off, the
program contents are also erased.
To program for recording
After steps 1 to 3-A or 3-B3), press U8 to insert a pause and
program the selections for side B by performing step 3-A to
3-B3).
When the selections for side A have been played, the unit
will pause. ("B" lights up.)
Set the tape to the beginning of side B, then press C or 10.
The selections for side B will start playback.
Notes
¢ The playing time for selection numbers higher than 20 will
not be added into the total playing time.
¢ When selections have been programmed for sides A and B,
the display shows the selections programmed tor side B
and the total playing time for side B in stop mode.
Advertisement
Table of Contents
