Dubbing Tapes (From Deck A To B) - Sony HCD-241 Operating Instructions Manual

Dubbing Tapes (from Deck A to B)
This section describes about the operation of the recording
from deck A to B.
1 Press & to open the cassette compartments,
insert the tapes with the sides to be played
back or recorded facing you and close the
cassette compartments.
Recorded tape Blank tape
Press HIGH SPEED DUBBING.
The unit enters recording pause mode for high speed
dubbing, the 1 and @ indicators light.
(Dubbing can not be carried out without pressing the
HIGH SPEED DUBBING button.)
HIGH SPEED
DUBBING
ce)
3 Press ill to start dubbing.
The recording pause mode will be canceled and
dubbing starts.
The #8 indicator goes off.
PAUSE
To stop dubbing, press HM on deck A or deck B.
Notes
© The tape in deck B is automatically recorded with the same
recording system as the original tape in deck A. So itis
unnecessary to set DOLBY NR.
e If the sound is affected by a television set during dubbing,
turn off the set or move it away from the unit.