Criteria For The Installation Location; Mounting The Device; Preparing The Device For The First Use; Electrically - Siemens KG N Series User Manual

NL Set up and connect
s Freestanding device
s Equipment and accessories
s Assembly instructions
s Instructions
s Customer service overview
s Warranty Supplement
s Energy label
s Information about energy consumption and
sounds
4.2 Criteria for the installation
location
WARNING
Risk of explosion!
If the appliance is located in a room that
is too small, a flammable gas-air mixture
can form in the event of a leak in the
cooling circuit.
Only set the device to
▶
a space, which has a volume of at
least 1 m per 8 g of refrigerant.
3
The amount of refrigerant is stated
on the rating plate. → fig.
The weight of the device can be up to
120 depending on the model.
The surface must be stable enough to
support the weight of the appliance.
Permissible room temperature
The permitted room temperature
depends on the climate class of the
device.
The climate class can be found on the
type plate. → fig.
1
Climate- Permitted space-
class temperature
SN 10 °C...32 °C
Depending on the device version
1
Not in all countries
2
96
1
2
/
1 5
/
5
Climate- Permitted space-
class temperature
N
16 °C...32 °C
ST
16 °C...38 °C
T
16 °C...43 °C
The device is fully functional within
the permitted indoor temperature.
If you use a device of the climate class
SN at lower room temperatures,
damage to the device up to a room
temperature of 5 °C can be excluded.

4.3 Mounting the device

The device in accordance with the
▶
install the installation manual.
4.4 Preparing the device for the
first use
Remove the information material.
1.
Remove the protective film and transport
2.
safeguards, eg adhesive strips and
cardboard.
Cleaning the device for the first
3.
time. → Page 105
4.5 Connecting the appliance

electrically

Insert the mains plug of the
1.
appliance's connecting cable
into a socket in the vicinity of the
appliance.
The connection data of the device
can be found on the type plate.
→ fig.
/
1 5