Table of Contents
Advertisement
11.7 Cycle time recalculation
After approximately 15 minutes from the
start of the programme:
• The appliance adjusts automatically
the cycle time to the laundry you have
put in the drum to have perfect
washing results in the minimum
necessary time.
• The display shows the new time
value.
11.8 Starting a programme with the
delay start
1. Press button Départ Différé again and
again until the display shows the number
of minutes or hours of delay.
The related indicator comes on.
2. Press button Départ/Pause.
The appliance starts the countdown of the
delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button Départ/Pause to
start the appliance, you can cancel or
change the set of the delay start.
11.9 Cancelling the delay start
To cancel the delay start:
1. Press button Départ/Pause to set the
appliance to pause.
The related indicator flashes.
2. Press button Départ Différé repeatedly
until the display shows .
3. Press button Départ/Pause again to start
the programme immediately.
11.10 Interrupting a programme and
changing a option
You can change only some options before
they operate.
1. Press button Départ/Pause.
The related indicator flashes.
2. Change the option set.
3. Press the button Départ/Pause again.
The programme continues.
11.11 Cancelling a running
programme
1. Press button Marche/Arrêt to cancel the
programme and to deactivate the
appliance.
2. Press button Marche/Arrêt again to
activate the appliance.
Now, you can set a new washing programme.
Before starting the new programme the
appliance could drain the water. In this
case, make sure that the detergent is still
in the detergent compartment, if not fill
the detergent again.
11.12 The ProSense System load
detection
After touching the Départ/Pause
1. The ProSense System starts the laundry
load detection to calculate the real
programme duration. The indicator
and the time dots flash.
2. After about 15 minutes the display shows
the new programme duration: the
indicator
goes off and the time dots
stops flashing.
The appliance adjusts automatically the
programme duration to the load to
achieve perfect washing results in the
minimum possible time. The programme
duration could increase or decrease.
The ProSense System detection is
carried out with complete washing
programmes only (no skipping phase
selected).
The ProSense System is not available
with all programmes such as :Laine/Soie,
Rinçage, EssorageVidange, and
programmes with short cycles.
button:
ENGLISH
23
Advertisement
Table of Contents
